Add the Random Flow Generator To Your

Red Sea Aquarium

Add the patented Random Flow Generator® Nozzle to your Red Se MAX or REEFER series aquatium

Red Sea Reefer Series Aquariums

Adding the Random Flow Generator to your Red Sea Reefer series Aquarium is easy. All system in this series share the same 25mm inlet nozzle. This means any of our Pre-Configured Flow Kits that include a 25mm pipe adapter will fit the outlet of your aquarium.

 

Choose the size Reefer system you have for recommendations.

Red Sea Reefer 525 and Smaller

Dual 1/2in Random Flow Generator® Nozzles

Optimal Flow: 640-670 GPH (or more)

For the Red Sea reefer 525 and below, we would suggest the dual 1/2in Random Flow Generator flow kit. This kit is best suited for the physical size of the tank as well as the typical return pump used in aquarium of this size.

    Red Sea Reefer 525 and Larger

    Dual 3/4in Random Flow Generator® Nozzles

    Optimal Flow: 700-800 GPH (or more)

    For the Red Sea reefer 525 and above, we would suggest the dual 3/4in Random Flow Generator flow kit. This kit is best suited for the physical size of the tank as well as the typical return pump used in aquarium of this size.

    Red Sea

    Reefer 170

    The Red Sea Reefer 170 has the same 25mm pipe inlet as it’s larger counterparts however, becuase of the small size, we would suggest a single 1/2in RFG or the dual 1/4in RFG setup.

    Choose the option that best fits your return pumps capabilities

    • 380 GPH or more – 1//2in Random Flow Generator
    • 350 GPH or less – Ultimate Nano Tank Returning Upgrade kit

    Slip-Fit Drop Adapter

    Use the 25mm to 1/2in Slip-fit rop Adpatgerl

    Red Sea Reefer Gen 2

    Most of the Red Sea Reefer Gen 2 series aquariums have two inlets, as opposed to a single like the Gen 1 series. Both of these outlets are the same 25mm pipe as is found on the single inlets of the Gen 1 series. This means you can use any of our pre-configured Red-Sea Reefer flow kits as well as a our single CADE flow kits that included 25 millimeter pipe adapter.

    Easy Upgrade!

    The Innovative Marine “reef ready” series both come stock with genuine 3/4in Loc-Line fitting. making hem ready to flow with the Random Flow Generator.

    The only decision you need to make is what size RFG Nozzles to go with. the 3/4in RFG are directly compatible, while the 1/2in RFG will require a reducer.

    3/4in Random Flow Generator® Nozzle

    Choose the 3/4in Random Flow Generator

    3/4in RFG Nozzles are directly compatible with your EXT or NXT system

    Convert The Stock Outlets to 1/2in Loc-Line

    1/2in Random flow Generators may be a better choice if your return pump is capable of 450 GPH or less. to do this, you will need a reducer and you may need some 1/2in Loc-line. Are are the parts you can use to do make this conversion.

    Find the Random Flow Generator for Your Aquarium

    Pre-configured flow kits, adapters and fittings design for just about every aquarium brand on the market today.
    Adding the patented Random Flow Generator® to your aquarium has never been easier.

    Random Flow Generator for Red Sea
    Random Flow Generator for WaterBox
    Random Flow Generator for CADE
    Random Flow Generator for Fluval
    Eshopps
    Random Flow Generator for JBJ
    Random Flow Generator for Lifegard Aquatics